Auto Bidirectional OBD2 Scanner All System Key Coding Car Diagnostic Scan Tool

Have you ever been bothered by these troubles?

The reset functions of your diagnostic scanners are not enough.
Limited vehicle compatibility of your automotive scan tools cannot recruit more business.

Don’t feel bad! BossComm IFIX980 OBD2 scanner can drive your trouble away. This entry-level diagnostic tablet provides 26+ maintenance functions for worldwide 1996-2023 vehicles (over 100 brands compatible), which can perfectly solve common repair needs in your workshops. And the BossComm IFIX980 car scanner will also bring more compatible vehicle brands and features via constant updating later.

✔3 Newly Added Functions: EGR Reset / Power Balance / High Voltage Battery Diagnostic
✔5 Hot Repair Functions:

Oil Reset (for 53 brands): Reset the oil life system and turn off the oil light to start a new cycle.
TPMS Reset (for 36 brands): Reset tire pressure and turn off the TPMS light after replacement.
EPB Reset (for 41 brands): Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
BMS Reset (for 31 brands): Re-match the battery control module and motoring sensor.
Throttle Matching (for 37 brands): Cycle the motorized throttle body through various states (idle, part throttle, WOT) to relearn their positions.

✔More Maintenance Functions: SAS Reset, Gearbox Reset, DPF Regeneration, Gear Learning, IMMO, Injector Coding, Suspension, Sunroof, Headlamp, A/F Reset, AC System Relearn, AdBlue Reset, Coolant Bleeding, Lang Change, NOx Sensor Reset, Seat, Stop/Start Reset, Transport Mode, Tyre Reset, Windows Calibration, etc.

*Menu varies by vehicle’s make, model, and year.

Outstanding New Feature–Bi-directional Control (Active Test)

BossComm constantly optimizes and raises its diagnostic level & functions on all the diagnostic scan tools. Now the 2023 upgraded version of BossComm IFIX980 scan tool is released.–It could meet various repair needs for technicians, repair workshops, and advanced DIYers.

The newly added “Bi-directional Control” is practical for finding out what’s wrong with a car. The IFIX980 bi-directional scan tool can actuate solenoids and actuators for active test and send commands to systems/components to test their working status, without using the vehicle controls or tearing the vehicle into parts. For examples:

Injector Buzz Test
Fuel Pump & Valve Tests
Acceleration Device Test
A/C Compressor Activation
Switch Cylinder Correction On/Off
Turn the Radiator Fan On/Off
Modulate Throttle On/Off
Widely applied to Windows, Doors, Sunroof, Headlamps, etc

* Note: PLS update the software to get this function and send the VIN for check compatibility firstly. It’s is not universal to all vehicles

OE-level E-CU Coding with All System Diagnostics

2023 New Functions for BossComm IFIX980 — ECU Coding & Personalization
ECU coding serves as a high-tier function for high-level vehicle models, which can enhance vehicle comfortability but also increase profits for workshops. Many believe that only manufacturers can modify the codes and activate the “hidden” features for the cars. But now the updated BossComm IFIX980 auto scanner also loads the same functions and you just need to upgrade the software in APK without any cost.

ECU Coding: Compatible with Audi, VW, Skoda, etc.
Matching: Rematch the repaired/changed component control modules.
Personalization: Activate high-end functions: activating daytime running lights / changing the brightness of the dashboard / adjusting interior lights / automatically activating the rear-view camera / activating the acoustic warning signal / adjusting the level of the side mirrors, etc. Disable some unneeded functions: such as deactivating the auto start-stop / changing the chimes / deactivating injector buzz sounds / disabling seat-belt warning / and more;

Note 1) Online Coding is not available. 
Note 2) Coding function varies by vehicle model

BossComm IFIX980 automotive scanner can access all available systems to perform OE-level all systems diagnostics on Engine, AT, ABS, SRS, TPMS, BCM, Network, Steering, EPB, Chassis, etc. This car diagnostic scan tool roots out the hidden problems under the hood and saves diagnostic time and reduces the diagnostic fee. The complete systems vary from different cars.

Retrieve ECU Information: display unit type, version numbers, and more specifications.
Read Codes: show you detailed code definition and useful information for diagnostics
Clear Codes: erase the faulty codes after repairing and turn off the check engine light.
View the Live Data: provide live data and parameters from the vehicle’s E-CU to help you quickly find potential problems in the vehicle.
Advanced Auto VIN Identification

Instead of manually inputting VIN codes one by one for reading vehicle information, this IFIX980 diagnostic scanner is equipped with advanced Auto VIN functions allowing you to start VIN scanning on the car’s ECU with one click and in this case, you can directly access vehicle diagnostic screen to complete the diagnostic work.

ECU Programming for Ford

Worldwide Coverage: Work on 100+ brands and 20000+ models.

• [America]: Compatible with Chevrolet, Buick, Cadillac, Chrysler, Dodge, Ford, GMC, etc.
• [Asia]: Compatible with Infiniti, Acura, Kia, Lexus, Hyundai, Subaru, Daewoo, Daihatsu, Mitsubishi, Honda, Mazda, Suzuki, Toyota, etc.
• [Europe]: Compatible with BMW, Benz, Audi, Porsche, Abarth, Alfa Romeo, Bugatti, Citroen, Dacia, Volvo, VW, Land Rover, Opel, Peugeot, Renault, Fiat, Jaguar, Lancia, Mini, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, etc.

Global Languages: English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, Polish and Traditional Chinese.

WHAT’S IN THE BOX

• BossComm IFIX980 Tablet
• 5V DC Charging Cable
• USB Cable
• Diagnostic Cable
• User Manual/Quick User Guide Carrying Case