ANCEL OBD2 Code Reader Car Scan Diagnostic Tool SRS BAT EPB ABS DPF Fit for BMW

Why Not Get one ANCEL BM500 Scan Tool for Your BMW NOW?

Since a auto repair shop may charge you 100 dollars just to diagnose a simple problem, Such as one-time battery registration or other car maintenance,Our BM500 OBD2 Scanner for BMW can pay for themselves after a single use.

Time and money are both important,One of the best ways to monitor your car’s health fast is with our BMW full featured OBD2 Scanner.This perfect scanner for BMW owners, priced under 100 dollars, very affordable to most home mechanics or beginner. and allows you to read, clear codes from almost all systems for BMW ,These systems include the engine, transmission, ABS,SRS systems and More.

So if you are a car owner for BMW, Why not get one Ancel BM500 full systems Code Reader for BMW to check out the health of all the major features of your car ? And you may not assume any scanner will work for all the features in your car ? Many scanners will advertise multiple OBD2 special features and system, but mostly those features and system aren’t compatible with your Vehicle for BMW and those diagnostic scanners are also very expensive.

Maintenance Functions of BM500 Obd2 Scanner for BMW MINI

2.Electronic Parking Brake(EPB) Service:Electrical Parking Brake is a technology that realizes parking brake by electronic control.If your parking brake fails,you need to fixed the problem by Retracts calipers for brake pad replacement.and move back calipers after servicing to the original position.our BM500 scan tool can help you complete repairs yourself without issues.including deactivates and re-activates brake control system,Reads and clears trouble codes, Turns off brake warning light.

3.Condition Based Service(CBS) Reset:This diagnostic scan tool allows you to reset the Engine Oil/Spark Plugs/Front Brake/Rear Brake/Brake Fluid/Microfilter ect.TP20 and UDS protocol in the setting can supports checking the time/mileage recommendations for fixed services and it analyses this data and tells you when a service is next due.

4.PCM Clear Adaptations:When the PCM (Powertrain Control Module) is not working properly, the vehicle will have problems such as warning lights displaying on the dashboard or even stalling and sputtering. Resetting the PCM on your vehicle will help to clear all codes from it after a problem is fixed.

5.Service Interval Indicator Reset: Mechanics might tell you to change your oil every 5,000 km. But According to most sources,new vehicles don’t need to follow the 5,000 km rule anymore. Most sources state that oil changes can happen between 12,000 and 16,000 km.This Code Reader for BMW can help you to change the default value and reset Service Interval by yourself so that you won’t not be warning again before the value.

6.Electronic Throttle Control ( ETC ) Reset:Choice the ETC Reset from the main menu to learn valvetronic limit positions on your Vehicles,Then just following the steps from our obd2 scanner for bmw. Resetting the Throttle Position after cleaning or replacement can help your nice car work on it is best condition.

7.Oil Reset: Allow you to reset your oil . Oil change frequency is dependent upon the make and model of your vehicle.The frequency also depends on you and your driving habits.But you should change your oil at least twice a year, regardless of how much driving you do.Furthermore, while changing your oil early might keep your vehicle’s parts fresh, it hurts the environment more than old oil.

Notice:Each car model has different configurations, different car may have different special functions.But Usually You car will have more than 6 special functions.before register your battery first Ignition on (key on), Engine off, Second Check the dashboard and confirm it is in a diagnostic mode,Third make sure your replacement battery is well connected,otherwise it won’t work.

Features of All System Diagnostic Scan Tool for BMW —ANCEL BM500

1.OBDII and Battery Volts Functions: Read and erase Fault Codes, Check Engine light, I/M Readiness, Data Stream, Vehicle Information,and Battery Voltage Checking FOR ALL VEHICLES.
2.ABS (Anti-lock braking systems) System: ABS operates by preventing the wheels from locking up during braking, thereby maintaining tractive contact with the road surface and allowing the driver to maintain more control over the vehicle.Use our BM500 ABS Code Reader to read and clear the error codes for the ABS to keep your ABS alway in working condition.
3.SRS (Airbag) System: It is designed to supplement the seatbelt system and improve occupant protection in certain type of crushes. Airbags supplement the seat belt and enhance passenger safety in certain types of collision.Use Our SRS Code Reader to read and clear the error codes for the SRS to keep your SRS alway in working condition.
4.Transmission System:It will can help before transmission problems become a big hassle. As the most common Trouble Codes come from the transmission of your vehicle. With a transmission diagnostic tool, it will send you a fault code if any. All you need to do is to fix an error code.
5.SAS System:The steering angle sensor (SAS) determines where the driver wants to steer, matching the steering wheel with the vehicle’s wheels,Our BM500 Full system scan tool for BMW can read and clear the fault codes of the SAS (Steering Angle Sensor) when the SAS MIL light illuminates on the dashboard. Please be noted that it doesn’t contain the SAS calibration function.
6.ESP System:The Electronic Stability Programme is designed to improve a vehicle’s stability by detecting and reducing loss of traction, which therefore prevents the tyres from skidding uncontrollably.
7.Immobilizer System:With the help of Immobilizer System, you can keep your car safe, secure and prevent it from being stolen.
8.TCM System:Allow you to erase Transmission control module (TCM) Trouble codes from the Failure Records when No fault detected during car ignition.
9.4WD System:Help you monitor the condition of your Four-wheel drive (4WD) which is designed to send torque to all four of a vehicle’s wheels to increase traction when needed.4WD might be the better choice for those who live in remote areas, need to work in extreme weather conditions, or enjoy off-road adventuring.
10.EKPS System: The electronic fuel pump control module (EKPS ) controls the fuel pump.EKPS module can fail to cause no start problem or cause issues under hard acceleration. Our Ancel BM500 obd2 for BMW can help you erase the fault code after you fixed the problem.
11.HVAC System:Read and Erase any air-conditioning codes,Some issues relating to how the vehicle runs that could affect HVAC performance.
12.Window System:Help you to diagnose your window issue on your car and Protect the your property from being stolen.
13.Headlight System:Diagnostic the condition of your headlight or called Headlamps,let you drive through dark tunnels, or low light parking garage without worry about the light will turn off Suddenly.
14.Notice:Each car model has different system configurations, the special reset functions and diagnosis system may Vary.

Basic Functions for BMW/MINI/Rolls Royce:

1.Read & Clear fault codes
2.Turn off fault light
3. Read data stream in text and graph
4. I/M Readiness test,
5. Smog emission test
6. Vehicle Information

Support Multi-language

English,French,Spanish,German,Russian,Swedish,Portuguese,Finnish,Norwegian,Danish

Coverage vehicle list:

1 Series Chassis: E81/E82/E87/E88/F20/F21/F52

2 Series Chassis: F22/F23/F45/F46/F87

3 Series Chassis: E46/E90/E91/E92/E93/F30/F31/F34/F35/F80/G20

4 Series Chassis: F32/F33/F36/F82/F83

5 Series Chassis: E39/E60/E61/F07/F10/F11/F18/F90/ G30/G31/G38

6 Series Chassis: E63/E64/F06/F12/F13/G32

7 Series Chassis: 38/E65/E66/E67/E68/F01/F02/F03/F04/G11/G12

8 Series Chassis: G14/G15/G16

X Series Chassis: X1 E84 F48 F49/X2 F39/ X3 E83 F25 G01/X4 F26 G02/X5 E53 E70 F15 F85 G05/ X6 E71 E72 F16 F86/X7 G07

Z Series Chassis: Z3 E36/ Z4 E85 E86/Z4 E8/Z8 E52

I Series Chassis: I3 I01/I8 I12

MINI Series Chassis:
R50/R52/R53/R55/R56/R57/R58/R59/R60/R61/F54/F55/F56/F60

Rolls-Royce Series Chassis: RR1/RR2/RR3/RR4/RR5

How to do BMW battery registration ?

It is very easy,please use our BMS Function on main menu or use battery Management,following the Procedure :

1.Find a new battery that matches the old battery.

The ratings (CCA, CA, Ah) should be identical or as bigger as possible to the original.

2.Locate OBD II Port

3.Turn ignition on,Engine Off ,The engine shouldn’t be running.

You won’t be able to perform the BMW battery registration procedure if the engine is running.

4.Choice BMS Function and Enter New battery 12 digits code or Choice Special Function – battery Management-Register a new BMW battery.

5.Press Ok button to complete the battery registration

Note: It can only register a new battery with the same specs as the original. (The ratings (CCA, CA, Ah) should be identical or as bigger as possible to the original. )

Why this tool can’t I Register my BMW Battery ?

Answer:.Not all vehicles need to do the battery registration after changing batteries.they can be directly replaced to New Original battery without issue.Such as E46E39E38E83,E53E36E85E86MINR52R53R50.

Update Guidence:

After you find your model of your car please according the step to download the zipped file ,then Double click to unzip the file .you may see three information :1.Help.avi 2.README.txt 3.Update.exe you can look 1 and 2 for some help
1.Click Ancel official website, download ancel client update tool software
2.Please connect device and computer with USB cable before upgrading.
3.The update software is only supported by windows 7/8/10.
(Win8/10 can run update software directly, only windows 7 need to install the driver.)
4.Click “install driver.bat” in the driver file to install the driver.
**Make sure that then Double click the “Update.exe” finish the process .
About the “Battery Register “,please see the” User Guide” on this listing’s detail page ” Technical Specification” part ,and according the step to operate.

Product Show

Questions&Answers Area:

1.How to get it start?

Simply plug into the OBD II port on your car and turn ignition on and you ready to go. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.

2.Why the vehicle linking error?

I: Confirm that the ignition is ON, check if the scan tool’s connector is securely connected to the vehicle’s DLC;
II: Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing;
III: Verify the control module is not defective.

3.How can I change the Russian Language Menu?

AUTOPHIX 7910 Works with English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese， you can choose from the settings menu.

4.Would this work on 2010 bmw x5 e70 diesel?

Yes,this device support full function diagnostic for most of BMW.

5.Does it free update online free?

Yes,lifelong free update online and support multi language menu.

6.I have a 2004 bmw 525i and a 2011 z4 3.0.Will this reader work on both?

Yes,it will support.

7.Will this work on 2003 e320 Mercedes?

No,it is professional scanner for BMW&MINI&Rolls-Royce diagnostic