ANCEL FD700 All ALL System OBD2 Scanner Diagnostic ABS SRS EPB TPMS CBS For Ford

Why choose the ANCEL FD700?

Both FD500 and FD700 are specially designed for Ford vehicles, but FD700 is a professionally upgraded version of FD500. In addition to hardware upgrades, the FD700 can do more high-level reset functions than the FD500. Compared with the OBD2 mode of FD500, FD700 adds an EVAP system test.

ANCEL FD700 All System OBD2 Scanner for Ford Lincoln Mercury Vehicles Automotive Code Reader Diagnostic Scan Tool with SRS SAS Calibration Oil TPMS IQA EPB BMS DPF Regen EGR Reset

ANCEL FD700 ford obd2 scanner is a specific version design for Ford Group and an upgraded version of the FD500, supports the vehicles of Ford, Lincoln, and Mercury after 1996 with 16PIN interface, including F150, Transit, VAN. Furthermore, the ANCEL scanner tool FD700 not only contains the special functions of the FD500, but also more other special functions, include ABS Service Bleed, Reset TCM KAM, SAS calibration, DPF Reset, TPMS reset, IQA, Oil light service reset, Clear crash data memory, Fuel Injector Correction Factors, DPF Parameter Reset, Transmission Tables Reset, Clear EGR Adaptive Tables, Fuel Injection Pump Learn, Diesel Particulate Filter Static Regeneration, and more.

All-System Diagnostic Scanner for Ford Lincoln Mercury

✔️ Engine System: The engine determines the power, economy, stability of the car. The FD700 OBD2 scanner can support 6 modes of OBDII functions & check battery voltage. Easily identify vehicle problems and turn off the engine lights. Help you pass the smog test and keep your car in the best condition.

✔️TPMS Reset: When there is a problem with your car’s tire pressure, or you have inflated the tire to the correct PSI, or the TPMS warning light turns on for no reason. At this time, you must reset the TPMS so the light turns off.

✔️ SRS: The FD700 can read and erase the SRS(Airbag) system error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.

✔️SAS: SAS Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor. The FD700 helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

✔️Battery System Diagnosis: Evaluate the battery charge state, monitor the closed-circuit current, battery management system reset, detect real-time data from 12V batteries, and display BATTERY DATA with fluctuations ranging from 8V to 18V.

✔️EPB: FD700 scanner can read and clear EPB trouble codes and is capable of retrieving fault codes information from the ECU.

✔️ABS: It helps maneuverability while hard braking. ABS essentially prevents the wheels to lock up and skid when brakes are slammed.

✔️Transmission: Auto Transmission is a set of transmissions used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. FD700 OBD2 scanner can read/clear codes and read data stream from AT.

✔️Oil System: Oil reset, check the oil at regular intervals, and have the car serviced regularly. After draining the oil out of the engine, the FD700 scan tool can help you to reset the Oil service lamps.