ANCEL AD310 Auto Code Reader Car OBD2 Diagnostic Scan Tool Check Engine Fault

Powerful Full OBD2 Functions List:

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Supports all 12v 16pin OBD2 Car Modes

The Car Must Support OBD2 Protocol !!!
(Note: AD310 only Support 12V Gasoline& Diesel, Does not support 24V Truck )

American Car :
Need Standard OBD2 Protocols from 2000 to now
for Chrysler , for Ford, for GM, ……

European Car :
Need Standard OBD2 Protocols from 2003 to now 
For VW , for Opel , for Audi for Seat , for Peugeot , for Renault,for BMW , for Volvo….

Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now 
for KIA, for Isuzu, for Mitsubishi, for Hyundai , for Mazda, for Nissan, for Toyota…

Chinese Car: 
Need Standard OBD2 Protocols from 2009 to now 

Russian Car: from 2012 to now
for GAZ, for VAZ ,for LADA, for IZH, for PAZ,for SeAZ ,for UAZ, for ZAZ…

NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is spercial design, so it may not compatible with some cars which do not support OBD2 protocol.

Support OBD2 protocols car:

1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)

ANCEL AD310 Packing List

1* Ancel AD310
1* User Manual
1* Usb Cable

FAQ

Q: Where’s the OBDII interface?

A: The OBD2 port is often under the dash, or under a panel below the handbrake in the central console.

Q: Why I can’t erase the fault code?

A: The fault causing the fault code to show will need to be repaired first then code can be erased.

Q: Will it diagnose abs or srs?

A: Hi, the major function of this AD310 scanner is detecting the Engine System, read and clear the error codes. Sorry, it can not diagnose ABS or SRS.

Please Note:

Works on vehicles with 12V battery only;
Must be standard OBD II protocol (16pin port).