All System OBD2 Scanner EPB ABS Oil BMS Car Code Reader Diagnostic Tool for VW

2023 Professional Diagnostic Scan Tool for VW for AUDI for Skoda for Seat Systems

AUTOPHIX 5600 scanner tool can quickly performs an automatic system test to determine which control modules are installed on the vehicle and provides diagnostic trouble codes overview. It does not only include basic functions – read and erase codes, but also capable of advanced functions – actuation, activation, adaptation, initialization, learn/relearn, c-alibration and coding.

In addition, it allows you to access the most commonly required service features, which usually only be available from VW Audi Skoda Seat level scanners or much more expensive professional tools. Such as transmission adaptations, battery registration, throttle body adjustment, as well as the followings:

Why Choose the AUTOPHIX 5600 Full System Diagnostic Scanner ?

1. Full OBDII functions : Read Fault Codes, Erase Fault Codes, Read Datastream, Vehicle Information, EVAP test , Version Information.

2. Engine System: Engine device that provides power for the automobile and the heart of the automobile. 7910 OBD2 scanner Support OBD2 cars from 1996 to now. It can support all modes OBDII functions & battery Voltage. Easily identify car problems and determine the cause of check engine light on. Help you pass the e-xhaust test and keep your car in the best condition.

3. Injector System : Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

4. Auto Transmission System: When the transmission fault light appears on your dashboard, 7910 transmission scanner allows you to read and display the parameters on the transmission system, such as transmission temperature, brake pressure, tachometer drive shaft, etc. To read and clear the faulty codes, and keep vehicles running smoothly.

5. ABS System: ABS automatically control the braking force of the brake when the car is braking, so that the wheels are not locked and in the state of edge rolling slip (slip rate is about 20%) to ensure the maximum adhesion between wheels and ground.

6. SAS System: Allows you to perform c-alibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After c-alibrate sensor successfully, its fault memory will be automatically cleared.

7. TPMS System: Allows you to check the tire sensor IDs from the vehicle and to perform TPMS programming and reset after tires sensors are replaced or rotated.

8. Battery Matching System: Allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.

9. A/C (Air Conditioner) System: Supports routine maintenance of air condition modules, such as air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.

More…….

AUTOPHIX 5600 Scanner for VW & for Audi with All Powerful Functions

AUTOPHIX 5600 automotive tool provides professional diagnosis for vw vehicle group and supports all car electronic control module.

1. Powertrain Module: Engine System, Transmission System, Battery Energy System, Wheels System, Transfer case, Electrical Machine Electronics, Diesel Fuel Pump, Gear, and more…

2. Suspension Module: Accumulator Management Electronics System, Steering System, Integrated Chassis Management, Tire Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more…

3. Body Module: SRS Airbag System, Camera, Audio Radio System, Gateway System, Charging Interface Module, Parking Assistance, Power Control Unit, Light, Battery Charging System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition, Electric Windows, and more…

4. Electrical Module: Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication and information / entertainment system and more…

Oil Service Light Reset: Allows you to reset the service lamps on the instrument cluster.

Tire Pressure Monitor System Reset: Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.

BAT Check, BMS Reset

Throttle Learn: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.

EPB Replace Brake Pads

Electronic Parking Brake Reset : Reset the brake pad after repairs in electronic parking brake system are done. Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.

ETCS Reset: Reset learned value of Intake valve, when updating specific components, these parameters inside should be reset or configured.

Battery Register / Battery Maintenance : Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.

OE Level Diagnosis: AUTOPHIX 5600 scanner can diagnose the car more complete and comprehensive, without the help of any other equipment or consulting the guidance of high-end technicians. Advanced and complete functions, quiet and simple operation process.

Quick Diagnostics: With the help of the advanced GD processor, the AUTOPHIX 5600 scanner provides fast and smooth access to each module. You can read code, live data, and clean code within seconds of each individual module. If you choose to scan automatically, the entire system diagnosis can be completed in 20-35 seconds.

Basic Function

Read and Erase Codes
Erase Codes
Retrieves VIN Information
Read Data Stream
I/M Readiness

Note:
Must be 12V cars and light trucks (non-electric) manufactured in 1996 or later that are OBD II-compliant with 16-Pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN).

Technical Specifications of the AUTOPHIX V.A.G diagnosis Code Scanner

1. Works on latest 2020 models. (More V.A.G car diagnostic software is being continuously updated)

2. Reads and clears diagnostic trouble codes and resets MIL of all systems.

3. Easy to update 5600 scanner through USB cable

4. Ergonomic design and ruggedly built for both shop and road tests.

5. I/M Readiness function is used to check the operations of the Emission System on OBD II compliant vehicles.

6. Data stream allows viewing of live or real time PID data of vehicle’s computer module(s).

7. Vehicle Enables retrieval of Vehicle Identification No.(VIN), Calibration ID Nos. ((CINs), Calibration Verification No. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles

8. Supports the most commonly required systems features like brake deactivation, service reset, steering calibration, TPMS,ect.

AUTOPHIX 5600 Can Change The Languages

English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese

Lifetime Free Update

1. How to get it start?

Simply plug into the OBD II port on your car and turn ignition on and you ready to go. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.

2. Why the vehicle linking error?

I: Confirm that the ignition is ON, check if the scan tool’s connector is securely connected to the vehicle’s DLC;

II: Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing;

III: Verify the control module is not defective.

3.How can I change the brightness of the screen?

AUTOPHIX 5600 scanner have Two skin style for choosing, you can choose white skin to enhance visibility during the day, and you can choose black skin to protect your eyes during the night. These functions can be implemented on the settings menu.