610 $

2024 KINGBOLEN K8 Bidirectional Scanner Auto Diagnostic Scan Tool Key Programmer 2024 New KINGBOLEN K8 Full System Diagnostic Tool with 2 Years Free Update –Bi-Directional Control(Actuation Test),Coding,34+ Service Reset Functions,As X431 V/PRO3S+– >>>>>Why KINGBOLEN K8 8″ Becomes CAR REPAIR SHOPS & MECHANICS ‘s First Choice? Full System Diagnostic Tool + 34+ Special Functions + Coding…

Availability: In Stock

Category: OBD2 Diagnosegerät

2024 KINGBOLEN K8 Bidirectional Scanner Auto Diagnostic Scan Tool Key Programmer

2024 New KINGBOLEN K8 Full System Diagnostic Tool with 2 Years Free Update

–Bi-Directional Control(Actuation Test),Coding,34+ Service Reset Functions,As X431 V/PRO3S+–

>>>>>Why KINGBOLEN K8 8″ Becomes CAR REPAIR SHOPS & MECHANICS ‘s First Choice?

Full System Diagnostic Tool + 34+ Special Functions + Coding + Actuation Test + Expandable Module Functions + Bluetooth/Wifi connection +Free Software + Android 10 OS running on 8-inch HD IPS Touch Screen + 64GB Storage+Multi Languages Supported + Wide Vehicles Coverage + 2 Years Free Update + 5 Years Warranty + Lifetime Free Tech Support.

✔KINGBOLEN K8 Main Features:

Enhanced Hardware Configuration：Kingbolen K8 comes with 8 inch touch pad, Android 10 system, 12600mA/h battery for long time use, 2+64G big memory storage for more vehicle software and diagnositc record.Rear 800W camera can support VIN number photo identification/Camera scan VIN.

Advanced ECU Coding(Online & Offline) for BMW, GM, Porsche, etc:K8 bluetooth scanner for car can Re-flash the Hidden Functions for personalization, Components Matching after making repairs or replacements, Reinforce Vehicle Performance, etc. NOTE: DO NOT Support ECU Reprogramming.

Guided Functions: With VAG Guided Functions, K8 can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for Audi/for Volkswagen, etc.

Programmable Module Installation(PMI): This function of k8 scanner is used to match new module data. When replacing the ECU with a new module, copy the recorded programming data of the original vehicle module into the new module to program the new module,which is used for Ford/for Lincoln/for Mazda.

Powerful Bidirectional Control/Active Test: No need to disassemble the car, K8 Bidirectional scanner can send commands to vehicle ECU for checking the integrity of systems or components‘ working status to pinpoint problematic components, such as open/close the sunroof, turn on the radiator fan and etc.

34+ Special Functions: KINGBOLEN K8 Comes with 34+ common special functions & advanced Reset, Relearn, Matching, Calibration and Adaption functions, such as: ABS Bleeding, Key Programming, Injector Coding, Oil Reset, EPB, Camshaft Position Sensor Relearn, Cam Crank Relearn, Calibration, Fuel Trim Reset, etc, makes for an excellent all-in-one diagnostic scanner for professional auto maintenance.

Key Matching/Programming: Add, Delete, Rewrite smart keys, Replace smart key ECU, Replace KNOB IGNITION, Relearn key.Note: ONLY available for Asian vehicles with early IMMO systems.NOT universally compatible. Please check compatibility with us if necessary.

Stable Wireless BT Connectivity: K8 scan too can work range up to 33 Feet (10M) for wireless diagnostics without cable limitations.

OE-Level Full System Diagnostics: Read/Clear Trouble Codes + 12-IN-1 Live Data in Graphing/Text and Data Record & Export + Retrieve Freeze Frame + Read ECU Information + Perform Active Tests for vehicle systems including Engine, Transmission, Airbag, ABS, ESP, and TPMS for more than 100 vehicle brands to quickly locate the issue and troubleshoot it.

More User-Friendly Features: AUTO VIN/ Camera Scan Vin + DTC Lookup Library+ Built-in Browser+ Remote Support + Diagnostic Feedback+Battery Voltage Monitor+Auto-generated Diagnostic Report and etc.

2 Years WIFI Software Updates: Allows you to get the most features and best user experience with one-click, maximizing return-on-investment.

*NOTE: Functions can be used are vary by vehicle model, check compatibility before purchase.

KINGBOLEN K8 OBD Professional Diagnostic Scanner(For ALL BRANDS, As Launch X431 V & Thinktool Pro)

Advanced ECU Coding: ECU Coding function of Kingbolen k8 car diagnostic tool can re-flash the hidden functions for customization, optimize the vehicle’s performance and recode the adaptive for certain components after making repairs or replacements.

With the help of ECU coding, you can these automatic functions allow you to concentrate on your driving experience mostly, like:

Improve fuel efficiency and the durability of mechanical parts;
Reduce power loss;Change the chimes on your car;
Set the mirrors automatically folding and unfolding;
deactivate the Start/Stop function, Seatbelt warning sounds, and more.

Online Coding: The vehicle coding brings many functions to vehicles. If the coding is not correct, some functions of the vehicle can not be used. Why online? The corresponding configuration of each chassis number of Volkswagen will be recorded in the manufacturer’s server. Through online coding, the correct vehicle code can be provided to ensure the normal use of the function.

Component Matching: All auto manufacturers have set the optimal data for your car to give full play to the optimal performance of the car. It helps vehicle data recovery to achieve the best performance of the vehicles.

IMMO / Key Programming: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

Bi-Directional Controls (Active Test):K8 bidirectioanl scanner allows you to send some command to see if the components are working properly, observe the resulting data to troubleshoot and fast repair, save you loads of time and help you get through more jobs every day.

Door Lock/Window/Horn/ Light/ Headlamp Test
Shift Solenoid Test, Cycle the A/C
ABS Pump Motor/Relay, Turn Fuel Pump On/Off
Open/ Close EVAP Vent/Purge Solenoid; ACM Test, Injector buzz test, etc

Active Test:

Active Tests, also known as Actuator Tests, are bi-directional diagnostic tests on vehicle systems and component. The tests let you to use the scanner temporarily activate or control a vehicle system or component, and when you exit the test, the system/component returns to normal operation. Some tests display a command to the operator. For example, if “Press Brake Pedal” displays, the operator has to press and hold the brake pedal and then continue. The sequence, number and type of tests are dictated by the control module. On some systems, the actuator tests cannot be restarted until the ignition key is switched off for some time. Alternatively, briefly start and run the engine, shut down, turn the ignition to the run position, then re-initiate the actuator tests.

The tests activate a component, but they do not check if the component is working correctly. Make sure the components to be tested are in good condition and correctly mounted.

Car ALL Systems’ Diagnoses

Besides classical 4 systems, you are able to use this diagnostic tool to diagnose your car in complete systems, such as Fuel system, Emission system, Body, Powertrain and more electronic systems. You are capable of reading DTCs when there are some issues with your vehicle’s systems, clearing the trouble codes after handling malfunctions. To make sure all the systems performs well, you can view live data stream before driving out.For instance:

Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Functios.

Auto VIN read Function :

It can read VIN information automanually when you connect Car , fast get the inforamtion .

Quick Check

It adopts smart detection mode. After the vehicle is connected, the system will automatically recognize the vehicle information, automatically check the vehicle, and automatically generates a report.

Quick print diagnostic reports：

Thermal printer, work with the main unit, also can work with module dock. Quick print diagnostic reports anytime and anywhere.

Graphical display：

Combine: Displayed in graph merge status for data comparison.

Customize:

Customize the data stream option to be viewed. Tap the button, a pull-down list of the data stream items appears on the screen. Select the desired items (max12 items), and then screen will display the waveforms corresponding to these items immediately. If need to remove any items, just deselect them.

Diagnostic Feedback：

If you encounter an unresolved problem or diagnostic software bug during diagnosis, you can revert the most recent 20 test records to Thinkcar Team. When we receive your feedback, we will analyze and troubleshoot it in a timely manner, to improve the quality of our products and user experience.

Modular Expansion>>Support optional modules:

printer, videoscope, battery tester,wireless TPMS tool,etc…（note: you can buy those model on ThinkStore）

V.A.G Guided Function

Guided Function (for VW, for Audi,for Skoda, for Seat): With guided function, KINGBOLEN K8 will be more efficient to diagnosis, as it can provide step-by-step maintenance guide to prevent vehicle failure caused by incorrect operation. Even if you are not a technician, you can operate complex functions with the help of the guided function.

FCA Security Gateway Access

AutoAuth for FCA SGW which makes K8 works for Chrysler, for Dodge,for Jeep, for Alfa Romeo and for Fiat after 2017. Register with AutoAuth to enable KINGBOLEN K8 tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and Bi-Directionals without using a bypass cable. (*Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)

Built-in Web Browser & DTC Look UP

K8 obd scanner has a built-in web browser（Chrome）, so you can quickly find information and view YouTube auto repair videos without using other devices, which is very convenient and considerate. DTC Library can help you find the meaning of the fault code quickly.

TPMS function:

with wireless TPMS tool (optional), TPMS activation, programming and learning functions can be supported. （note: you can buy those model on Store）

1.TPMS Diagnostic function KINGBOLEN K8 can work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning.

a)Activation:to activate the sensor’s IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b)Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication.

c) Learning:to write the sensor ID into the vehicle for sensor identification.

34+ Service Reset Special Functions:

K8 can program and code the electronic control system of prevailing vehicle models, also perform special functions, including:

1 -Oil Reset The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.

2 -Elec.Throttle Adaption Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.

3 -Steering Angle Reset To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.

4 -Battery Matching This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.

5 -ABS Bleeding When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

6 -Break-pad Reset lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.

7 -DPF Regeneration DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.

8 -Gear Learning The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336’gear not learned’. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine , crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC ‘gear not learned” is present, gear learning must be performed.

9 -IMMO Service To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,,BCM, or remote control battery is replaced, anti-theft key matching must be performed.

10- Injector Coding Write injector actual code or rewrite code in the to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.

11- TPMS Reset After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

12- Suspension Matching This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.

13- AFS Reset This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.

14- A/T Learning This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.

15- Sunroof Initialization This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.

16- EGR Adaption This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

17 -ODO Reset a) ODo reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.

18- Airbag Reset This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicatorlights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use.

19- Transport Mode ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.

20- A/F Reset This function is applied to set or learn Air/Fuel ratio parameters.

21- Stop/Start Reset This function is used to open or close the automatic start-stop function via setting the hidden function in(provided that the vehicle has a hidden function and supported by hardware).

22- NOx Sensor Reset NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine .

23- AdBlue Reset (Diesel Engine Exhaust Gas Filter) After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.

24- Seat Calibration This function is applied to match the seats with memory function that are replaced and repaired.

25- Coolant Bleeding Use this function to activate the electronic water pump before venting the cooling system.

26- Tyre Reset This function is used to set the size parameters of the modified or replaced tire.

27- Windows Calibration This feature is designed to perform door window matching to recover initial memory, and recover theautomatic ascending and descending function of power window.

28- Language Change This function is used to change the system language of the vehicle central control panel.

……

Additional Features of K8:

Android 10.0 System Diagnosis: make you smooth operation, this diagnostic tool will be capable of speedier, more accurate diagnoses.

10 hours of mixed-use battery life: Compatible With up to 10 hours of mixed-use battery,gives you a flexible operation experience.

Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

Maintenance Report: Create vehicle files for all repaired vehicles, integrate all repair data including diagnostic reports, real-time data stream reports and other diagnostic data into one, so that the technician can know the condition of the car.

Two-year free update: Support online smart one-click upgrade of car software. After two year, if you don’t plan to update, the scanner can continue to diagnose

Support more than 150 Car Brands

Covering more than 150 car series and ten thousands of car models.

·Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm

·Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR

·USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM

How To Register KINGBOLEN K8 :

Step1 :Setting language & Time Zone , Connect WIFI

Step2 :Agree the Register term

Step3 :Register an account with your Email box

Step4 :VCI Activate – Enter the serial number and Password to activate

How To Update KINGBOLEN K8 :

KINGBOLEN K8 is with 2 years free Update Click “Update” to One-Click Update

How To Printer the Diagnostic Report :

Two Ways Print :

1. Share the Diagnostic Report out via USB , then print .

2. Use Think Printer to print directly ( need buy Think Printer additional )

High-end hardware configuration of KINGBOLEN K8 :

Operating System: Android 10

Camera:Rear camera 8.0MP

Memory:2G

Storage:64G

Network:Wi-Fi, WL AN 802. 11b/g/n

Bluetooth: Bluetooth 5.0

Battery: 3.7V/12600mAh

Screen: 8 inches

Working Temperature: 0°C ~ 50°C S

Temperature:-20°C ~ 60°C

Package List :

PaymentDelivery detailsTerms of salesAbout usContact us

Payment

We accept PayPal payment.

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

Delivery details

Shipping

Order will be shipped within 1 business day after payment confirmed.

We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse.

From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping

Delivery time varies from 2 to 6 business days.

From our China warehouse via DHL or Fedex

Delivery time varies from 5-12 business days.

We will ship according to your PayPal address.

Please make sure it is correct and include phone number for delivery.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Please include your special requests in eBay note if there is any.

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty,

12 months free repair for the devices.

Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us in 30 days and keep it unused.

We will instruct you on how to return and get refund or replacement.

If after 30 days, or the item has been used, we have the right to decline your claim.

Items should be returned on buyers’ cost for repair or replacement.

About us

Who We Are?

We are specialized dealer of On-Board Diagnostic tools and automotive electronics

for more than 10 years.

We are authorized first class distributor of Launch,Thinkcar,Ediag and Kingbolen brands,

and more brands will be show in our store in near future.

What Do We Have?

We have office and warehouse in US,UK,HongKong and China to ensure fast shipment and after-sale service.

We have more than 100 employees devoting to customer satisfaction.

Terms of tax:

We are not responsible for buyer’s local taxes, please consult your local Customs for tax details.

Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.

Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.

We will reply within 24 business hours.

Business time: GMT8 (9:00-18:00) from Monday to Friday.

Brand	KINGBOLEN
Model	KINGBOLEN K8
Version	2024 Newest Elite Global Version
Supported System	ABS, DPF, EPB, SAS, SRS, TPMS, Engine, Transmission, IMMO, Key Coding
OBD Interface	CAN, EOBD, OBD, OBDII
Connectivity	Bluetooth
Vehicle Type	Passenger Vehicle
Manufacturer Part Number	KINGBOLEN K10 X431 V PRO 5 V+ PROS MK906 Phoenix Plus Elite
Features	Bi-Directional Control, Actuation Test, Guided Functions, Anti-theft IMMO Serivce, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, Backlit Display
Accessories	Adapter Cable, Carrying Case, USB Cable, User Guide
Material	100% KINGBOLEN Original
Type	Bi-directional Bluetooth Diagnostic Scanner Tool
Update	2 Years Free Update
Processor Memory	2GB
Storage Capacity	64GB
Operating System	Android 10
Display	8inch
Advantage 1	All Systems Diagnostic, Coding, Active Test
Advantage 2	Full OBD2 Functions,34+ Special Reset Functions
UPC	756029666634