Autel MaxiIM IM608S II : Advanced J2534 E~CU Co/ding and Pro/gramming Tool !

Equipped with the powerful MaxiFlash Elite J-2534 pass-thru Pro/gramming device, Autel IM608S II features the same E~CU pr*graming & Co/ding functions as Autel MK908P II & MaxiSYS MS908S Pro II and here below are brief intruductions to these functions:

Online & Offline E~CU Pro/gramming:

(1) pr*gram the data to a new IMM/O module, (2) repair the IMM/O E~CU data loss, (3) upgrade the IMM/O E~CU software version, etc.

• Online Pro/gramming works for BMW & Benz specific vehicle models only.
• Offline Pro/gramming requires OE-authorized Pro/gramming software. Connect the MaxiFlash Elite J-2534 pass-thru to PC to perform rePro/gramming capabilities on any modern vehicle diagnostic bus.

E~CU Co/ding Functions: match & code newly replaced modules, modify preset module parameters, Activate functions that was hidden by the manufacturer, OE-setting Customization and so on. E~CU Co/ding function allows you to recode adaptive data for certain components after making repairs or replacements to improve driving performance, and fuel efficiency and reduce power loss.

• Component Matching: Write adaptive data to match various onboard modules after replacement.
• OE-Setting Customization: Modify preset software parameters to reduce power loss, improve fuel efficiency, reduce component wearing and so on.
• Activate High-end Functions: such as activating the interior lights, courtesy lights, mirrors automatically folding and unfolding, daytime running lights, etc.
• Disable Unneeded Functions: such as deactivating the auto start/stop, l**king seatbelt warning sounds, injector buzz sounds, etc.

Online E~CU Co/ding:

• Directly access to the OEM online Co/ding data of high-end vehicle repair.
• Compatible with BMW, for Benz, for Audi, for Porsche, etc

Note:  E~CU Pro/gramming & Co/ding functions are not universally compatible for all vehicles. The specific functions also vary by different car brand, model and year. Please provide VIN for us to check function compatibility.

Autel MaxiIM IM608S II : 40+ Services & Special Functions to Expand Your Business !

Autel Scanner MaxiIM IM608S II is able offers over 36 services function includes commonly used reset & maintenance functions that a DIYer or auto technician would need for everyday car care. Here below are some of the most popular services:

• Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
• BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• IMM/O / K-Y Pro/gramming: Disable a lost vehicle K-Y to protect the vehicle from being stolen and add the new K-Y. (work only on Asian cars that feature low-grade IMM/O systemI
• Injector Co/ding: Code a new injector to better identify injectors to accurately control fuel injection.
• ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
• SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
• Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
• Headlight Matching: initialize the adaptive headlight system
• …

More Can be Done After Maintenance / Reset or Component Replacement: initial adaptation, Auto-learning, relearn, auto detection. Such as Crankshaft Sensor Learn and etc.

Note: The above mentioned is just a small portion of all supported services and more are not listed. Please also know that Not All service & Special functions are universally compatible. Please send VIN number and the functions you need to us to check compatibility.

Autel IM608S II 2024 Version: All System Diagnosis & Full Bi-Directional Control Function Same As Autel Elite II !

Besides its professional IMM/O & K-Y Pro/gramming ability, Autel MaxiIM IM608S II is also high-end general diagnostic tool that is able to access all availbale modules and systems to perform in-depth OE-level daignosis and features full bi-directional control functions to accurately test various actuators to determine if there is need for repairing or replacment. These functions are the same with Autel MaxiSYS Elite II, able to support 98% of US, Asian and European mainstream vehicles, up to 2021, 2022, and 2024 newer models.

Language Switching Service & No IP Restriction & :

Autel IM608S II is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English and it can be switched to Spanish, German, Swidish, Italian, Portuguese, French and much more.

Note: If you need to switch to a different language, please provide device S/N (12 digits, at the back of the device, eg: VB7GL6C0579)

There are a lot more functions for you to explore:

Digital Inspection: Work with MV108:

The Digital Inspection application configures the MaxiCOM Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way

Autel Remote Expert:

Developed by Autel, Remote Expert is a cloud-based solution offering Technicians with module Pro/gramming requirements a connection to pre-qualified Remote Experts in the field.

VAG Guided Function:

Make successful settings or adaptations without entering the security access code & channel number for VAG group & Bentley, Man LD cars. This function will anticipate your next move by guiding through every step until you find the solution.

Remote Desk Function:

Built-in TeamViewer APP to receive ad-hoc remote support from Autel’s support center, colleagues, or friends, by allowing them to control your MaxiIM tablet on their PC via the TeamViewer software.