ANCEL AD310 Car OBD2 Scanner Code Reader Auto Diagnostic Scan Tool Check Engine

Description:
Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time. 
ANCEL AD310 OBDII scanner detect the engine system, read and clear the error codes, turn off engine lights, turn off the MIL, affordable and easiest to operate OBD2 scan tool for DIY customers.
Once plugged into your vehicle’s 16pin OBDII DLC, the unit will power up and prompt you to start your ignition.

 

 

6 EOBD OBDII Functions:
•Read codes:  Read hard (memory) / pending (intermittent) and historic codes
•Clear codes:  Clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
•Live Data:  Reads live data stream 
•Freeze Frame:  view freeze frame data
•I/M Readines:  I/M monitor readiness test, turn off the MIL (check engine light)
•Vehicle information:  Retrieves vehicle information
•DTC Look up:  After the code was found, it’ll show the definition directly by clicking the error code you selected

 

 

Main Features:
1. large easy-to-read backlit LCD screen
2. read and clear diagnostic trouble codes for the check engine light, both generic and manufacturer specific codes
3.Built-in OBD-II DTC lookup library, Shows the code and what the code means directly, don’t need to search online
4.The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment
5. A 2.5 feet/ 1m long cable and made of a very thick flexible insulator. No need any batteries and gets the power directly from the OBDII Data Link Connector in your vehicle.
6. There are 4 buttons on AD310, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu. Three Years Warranty Guarantee.
7. Support OBDII protocol: it supports ALL OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and can
8. Supports Vehicles: The AD310 Scanner works on OBDII 16PIN domestic import vehicles.
9. AD310 Support Languages：Russian, Spanish, Portuguese, English, French, German, Dutch, Finland

 

 

 

Support Languages:
Russian, Spanish, Portuguese, English, French, German, Dutch, Finland

 

 

Supported Car List (Very Important)
AD310 Support 12V Diesel , Gasoline Car, DO NOT Support Hybrid, Electrical Car.

American (USA) car
Compatible with Standard OBD2 Cars after 2001:
for Chrysler, for Ford, for GM, for Jeep
European car
Compatible with Standard OBD2 Cars after 2004:
(if you car is Opel in 2004, 2005, 2006, please ask us first)
for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat,
for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land
Rover, for BMW, for Vauxhall, for Volvo, for Fiat, for VW, for Ford,
for Jaguar,for Skoda Superb after 2006
France Car
for Citroen, for Peugeot after 2006,
Not Support for Renault
Asian (Japanese/Korean) car
Compatible with Standard OBD2 Cars after 2005:
(if your car is in 2004 2005 2006 release , please ask us first)
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus , for Mazda, for Subaru, for Toyota
for Nissan after 2008
for Suzuki after 2012 
Not support for Ssangyong

Note:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.
Please Leave us message in below format, we will reply you within 8 hours.
for example : xx, 2005, 2.0cc, Diesel
 
Warning:
Not Support Russian Cars, VAZ,UAZ,LADA  ； Not works with Trucks, Pickups, Vans

 

ANCEL AD310 OBD2 Scanner Usage:
1, Plug into the car OBD2 16pin port
2, Start the engine (ignition), the tachometer will point around 0.7
3, Chose the diagnostic menu as you want
If you have any question, pls kindly contact us.

 

Product Specification:
Display: Backlit, 128 x 64 pixel display wit contrast adjustment
Operating temperature:0 to 60 °C (32 to 140 °F)
Storage temperature: -20 to 70 °C (-4 to 158 °F)
External power: 8.0 to 18.0 V power provided via vehicle battery

 

 

Package includes:
1 x AD310 Scan tool main unit
1 x User’s Manual