ANCEL AD530 OBD2 Scanner Engine Battery Car Code Reader Diagnostic Scan Tool

ANCEL AD530 OBD2 vehicle scanner is designed for both professional mechanics and home-use customers. It supports full OBD modes and it has a special battery tester function that allows you to monitor the real-time battery status. It supports lifetime free updates, and in fact, our technical team is constantly updating its database and software. You don’t have to worry about its fluency, we use a new generation of 32 MB flash memory chips, equipped with our unique “Help” button to help you understand the complex professional vocabulary to ensure a pleasant user experience.

Features

1. Reads and displays DTCS(Diagnostic Trouble Code); Erases DTCS
2. Reads live data stream
3. Views freeze frame data
4. O2 sensor test
5. I/M monitor readiness test
6. Displays On-board monitor test results
7. Evap system test
8. Retrieves vehicle information(VIN, CIN, and CVN)
9. Reads, records & playbacks DTCs
10. On-Screen live data graphing, Built-in code library

Special functions

1. Help function(“i” button)
2. BAT test (Real Time Battery Voltage)
3. The newest fault code database
4. Print DTCs report via PC
5. Feedback Function
6. Lifetime free update

Works on most vehicles sold in the US with the model year of 1996 or newer.

Supports ALL OBDII protocols, including ISO9141,KWP2000,J1850 PWM,J1850 VPW and CAN.

Meanwhile, we have upgraded our products for the American market.

However, due to the complexity of the agreement of cars produced by car manufacturers, please e-mail us if you need confirmation.

Live Data Stream and Freeze Frame Data

Live data stream can show certain vehicle elements in real-time to monitor your vehicle status, such as engine RPM, speed, coolant temperature, voltage and so on. Freeze frame data can be either a single record of a certain set of operating conditions. It’s a snapshot of whatever is wrong with your vehicle to help you fix your vehicle in time.

EVAP Test

The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. The OBD2 diagnostic tool does not perform the leak test, but signals to the vehicle’s onboard computer to initiate the test. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.

On-boarding Monitoring and O2 Sensor

Monitor the condition of the vehicle and check the status of the oxygen sensor in time. When O2 Sensor is Bad: Drastically worse gas mileage and performance; Rough running that doesn’t improve after changing spark plugs and plug wires; Fouled spark plugs and an engine that runs rich (black smoke, carbon around the tailpipe).

I/M Readiness

Designed with I/M readiness hot key, provides quick access to emissions readiness status, helps the engine run as efficiently as possible and also to produce as few emissions as possible.

DTC-Lookup and “i” – button

Not only explain the fault code, but also analyze the possible causes of the vehicle.

User – friendly “i” button lets you directly understand the meaning of the code without any hassle. Pressing the “i” button will give you accurate repair advice instead of a bunch of technical terms you don’t understand. Our fault code base and software versions are permanently and continuously updated for free.

Upgraded Graphing Battery Test Function

Detect real-time data from 12V batteries and display battery graphs with fluctuations ranging from 8V to 18V. The discharge voltage of a normal battery is about 12V, the starting voltage is generally 7.5V-9.5V, and the charging voltage is about 14V. Our technical team recommends that you monitor your battery and replace it if the battery is not in good condition.

Compare with other regular code readers:

The improved battery detection function allows monitoring your vehicle battery automatically with reliable real-time graph data form instead of a direct result on the screen that an ordinary code reader does