299 $

MainFeatures of D7: ✅All System Diagnostics; ✅Full OBD2 Functions; ✅36+ Hot Reset Functions; ✅Special functions within diagnostics; ✅E/CU Coding; ✅Bi-Directional Control/Actuation Test/Active Test; ✅8-in-1 Live Data Graphing; ✅Wide Car Coverage & 15+ Languages; ✅Three Years Free Update& Support; ✅Android 10; ✅7″ Touch Screen with 1024*600 Resolution; ✅Quad-Core 1.6GHz Processor; ✅4000mAh; ✅2GB+32GB Storage; ✅2.4GHz & 5GHz…

Availability: In Stock

Category: OBD2 Diagnosegerät

MainFeatures of D7:
✅All System Diagnostics;
✅Full OBD2 Functions;
✅36+ Hot Reset Functions;
✅Special functions within diagnostics;
✅E/CU Coding;
✅Bi-Directional Control/Actuation Test/Active Test;
✅8-in-1 Live Data Graphing;
✅Wide Car Coverage & 15+ Languages;
✅Three Years Free Update& Support;
✅Android 10;
✅7″ Touch Screen with 1024*600 Resolution;
✅Quad-Core 1.6GHz Processor;
✅4000mAh;
✅2GB+32GB Storage;
✅2.4GHz & 5GHz WiFi;
✅One-Click Updates with WiFi.

2024 XTOOL D7 All System Bidirectional Car OBD2 Scanner 36+ Services Scan Tool

🤗2024 Newest XTOOL D7 OBD2 Scanner,Bidirectional Scan Tool comes with 🥇36+ Reset Functions,🥇E~CU Coding,🥇All System Diagnostic,🥇Auto VIN,🥇8-in-1 Live Data Graphing,🥇3 Years Free Update.

MainFeatures:

✅All System Diagnostics >> Access all vehicle modules to get a in-depth insight. D7 can scan all available car systems to ✔read/clear codes, ✔read live data ,✔read freeze frame,✔read e/cu information…

✅36+ Hot Reset Functions >> Including 36+ reset services, meeting most of maintenance needs, such as Oil Light Reset,EPB Reset,SAS,DPF Regeneration,BMS,Reset,Throttle Relearn,ABS Bleeding,Injector Coding,etc.(❗NOTE: Reset Functions not available on all vehicles,please contact with us via ebay message to comfirm the compatibility before purchase.)

✅E/CU Coding >> Allows to code/match the new e/cus, and customize the vehicle as needed, optimize the specific performance to improve fuel efficiency, reduce power loss, improve the durability of mechanical parts, etc.

✅Bi-Directional Control/Actuation Test/Active Test >> D7 allows sending commands to the e/cus to perform active tests, lie A/C Clutch Test, Fuel Injector Test, window, door test etc,helping you quickly find out bad parts and pinpoint faulty issues.

✅Full OBD2 Functions >> Provide10 Modes of OBD2 for a complete diagnosis, such as Read / Clear Trouble Code, Live Data, Read Freeze Frame, Read ECU Information, On-Board Monitor Test(Misfire cylinder data), O2 Monitor Test, I/M Readiness(Smog Test), etc.

✅8-in-1 Live Data Graphing >> Helps you further check potential problems of the vehicle.

✅Auto VIN >> Detecting vehicles quickly, scan all the available systems/modules on the vehicle.(For couldn’t Auto VIN’s vehicle, you could manually input the VIN)

✅Wide Car Coverage & 15+ Languages >> ✔Cover more vehicles to meet your needs. ✔ Multilingual menu allows auto mechanics around the world to use it without language barriers.

✅Powerful Performance >> Android 10.0 OS,7″ Touch Screen with 1024*600 Resolution,Quad-Core 1.6GHz Processor,4,000mAh,2GB+32GB Storage,2.4GHz & 5GHz WiFi,One-Click Updates with WiFi.

✅Three Years Free Update & Support >> Provideing 3 years free update and lifetime tech support.

Full Systems Diagnostics

XTOOL D7 scan too can access all available vehicle modules including but not limited to PCM,TCM, ABS,AIR,EPB etc.

🔍Read Codes: Read the fault code, fault description, and fault code status within the selected module.

🔍Clear Codes: Clear the fault code in the selected module and turn off the fault light on the meter.

🔍Read Live Data: Reading all the data flow information contained within the selected module allows you to view the operating status of the selected system and helps in fault analysis.

🔍Read Freeze Frame: Accompanied by fault codes, record the state of fault codes appearing, to provide help for vehicle fault repair.

🔍Read E/CU Information: Read the version information, model information, etc. of the selected module.

Full OBD2 Functions

【Read Trouble Code】Displays the fault codes currently stored in the powertrain that cause the MIL lamp to illuminate, displays the pending fault codes for the current driving cycle, and reads the permanent fault codes stored in the system.

【Clear Trouble Code】Clear fault codes and freeze frames in the powertrain that have illuminated the MIL light, and pending fault codes

【Live Data】Recognizes vehicle powertrain information and displays currently available data on diagnostic equipment.

【Read Freeze Frame】Displays freeze frame data such as the time when the error code appeared, mileage, and other information.

【I/M Readiness】Identify vehicle powertrain information such as engine speed, water temperature, ignition advance angle, intake pressure, and fuel system closed loop status.

【On-Board Monitor Test】Test results of in-vehicle systems and in-vehicle monitors.

【O2S Monitoring Test】Displays the Oxygen Sensor Monitor screen and the collected oxygen sensor test results.

【Component Test】Control testing of online systems or components.

【Vehicle Information】Display the whole vehicle information. Vehicle identification code, calibration ID, calibration verification ID, E/CU name and other information.

【Monitoring of fire data】Test results of in-vehicle systems and in-vehicle monitors,fire data monitoring is important within the mode.

E/CU Coding

NOTE: Fit for VW, Fit for SKODA, Fit for AUDI ONLY.

Always the priority when searching for a professional car scanner diagnostic tool, with E/CU Coding, you can update the software of car modules to improve car performance!

Flash hidden function
Disable annoying function
E/CU module replacement

Bi-Direction Control/Actuation Test/Active Test:

🔧🔧🔧D7 bi-directional control scan tool can send commands to vehicle E/CUs to perform active tests on various car components and parts to pinpoint fault locations easily and effectively.

Activate window lifters
Activate windshield wipers
Activate hazard warning lights
Turn on/off the lights
Turn on/off the horn

36+ Reset Functions:

Providing various solutions for all module repairs,including:

[1] Oil Reset > Reset the maintenance reminder function,turn off the oil light from the instrument cluster.

[2] Throttle > Throttle body damage replacement requires diagnostic matching learning on throttle body.

[3] EPB > Mainly used for maintenance of brake systems, (brake maintenance, replacement of brake pads, replacement of electronic sub-pumps, etc.)

[4] SAS > Reset the steering angle,ensures that the vehicle follows a straight line as well as an automatic steering wheel straightening function.

[7] Gearbox Match > Using the tester transmission matching function to write the serial number of the newly replaced parts, matching and self-learning.

[8] BMS Reset > After replacing the vehicle battery reset the BMS with diagnostic equipment .

[9] Injector Coding > After Injector replacement / stock injector sequence adjustment / stock E/CU replacement,using the function to coding the injector.

[10] DPF/GPF > Collects particulate matter from exhaust gases during vehicle operation, which at a certain level affects engine performance and requires regeneration (Passive regeneration).

[11] Gear Learning > When the vehicle engine is overhauled, the crankshaft position sensor is replaced or the timing belt is replaced after the crankshaft position sensor needs to be learned with a diagnostic device to ensure that the engine is running properly.

[12] TPMS Reset > Resetting the tyre pressure monitoring system and extinguishing the tyre pressure warning light.

[13] Power Balance > After the repair, it is necessary to test the airtightness and balance of the cylinder and adjust the power balance of the cylinder.

[14] Tire Upgrade > Modified tire data needs to be written to the vehicle module via diagnostics to avoid inaccurate vehicle information (speed, gas mileage, range, etc.) indicated by vehicle gauges.

[15] Transport Mode > Many of the functions of the vehicle in transportation mode are restricted and unavailable, and can be released from transportation mode through the diagnostics.

[16] A/F Reset > Air-fuel ratio tuning is the process of changing the engine’s torque by brushing the data parameters inside the E/CU to achieve the engine’s maximum horsepower

[17] Headlight > Any headlights that have been damaged by cuts and scrapes will need to be repaired and replaced. Vehicle headlights need to be repaired after the two headlights to match the adjustment, including the height of the light, the lighting area and adjust the learning of the motor.

[18] Electronic Pump Activation > When a cooling system malfunction is detected and repaired, the electronic water pump needs to be activated to check the failure point of the cooling system, and it can also be used to evacuate the air in the cooling system.

[19] Suspension > Air suspension module damage, air bag deterioration and leakage, air tube deterioration and breakage, or other original damage after the replacement and repair need to use diagnostic equipment to match the suspension system

[20] Seat Match > Inspection and repair, removal or replacement of the seat assembly, the seat control module needs to be followed by automatic configuration of the internal data of the seat module to ensure that the seat adjustment function works properly.

[21] EEPROM > Anti-theft matching and meter mileage adjustment auxiliary function, some vehicles’ anti-theft information is stored inside the meter chip, which can not be read through the OBD diagnostic interface, so you need to read the anti-theft information and brush writing of the meter through this function and accessories.

[22] ABS Bleeding > After replacing the brake fluid, brake pipe, brake sub-pump, ABS pump, brake drum, brake fluid jug, brake fluid level sensor, it is necessary to evacuate the ABS system, you can use the diagnostic instrument’s special function of self-venting to evacuate.

[23] Stop/Start Reset > If you feel that the start-stop function is not very useful and interferes with driving, you can turn the start-stop function off by using a diagnostic device.

[24] Windows Initialization > The power window functions are: one-touch up/down, anti-pinch function. The related control programs are stored inside the body control module. Unstable battery voltage or battery replacement will cause data loss, these functions can not be used, you need to use diagnostic equipment to re-initialize the module.

[25] Airbag Reset > Airbag system repair is to erase this data recorded by the module and restore the module’s factory settings.

[26] Language Change > Some vehicles factory only configured to change a language pack, can not be changed, you can download the appropriate language pack through the diagnostic instrument to set the conversion language.

[27] Control Unit Reset > The software operation will be affected by the operating temperature, supply voltage, resulting in malfunctions during use. Resetting the module by means of a diagnostic instrument restores the module’s software operation to normal. (Only fit for VW control modules)

[28] Rain/Light Sensor > After replacing the front gear or replacing the sensors you need to learn to re-match the sensors. It is also used to test the sensors.

[29]A/C Relearn > Reset self-learning of the compressor’s operating data and reset self-learning of the servo motor’s position are used to detect and verify the faulty parts of the air conditioning system.

[30]HV Battery > New energy vehicles have a fault repair, you need to ensure that the high-voltage battery has no power output, through this function can be disconnected from the high-voltage battery on the vehicle’s power output, so that the maintenance workers safely on the volume of maintenance checks. It is also used to check the data of small cells in the battery pack.

[31] VGT Relearn > Replacing either the turbocharger or the solenoid sensors within the turbocharging system requires resetting and learning the turbocharging system.

[32] FRM Reset > FRM failure will cause the vehicle’s windows, headlights and other systems work abnormally, FRM module will not be hardware damage, use the diagnostic instrument’s special function of the E/CU into the reset.

[33]EGR Relearn > After replacing the EGR valve,using the scanner to match and learn the EGR valve to ensure that the exhaust gas recirculation system works properly.

[34] SRS > Acceleration sensor monitoring inac/racy will cause a significant impact on the vehicle, when replacing the sensor or monitoring data is incorrect with a special function to calibrate the sensor.

[35]Clutch Adaption > After replacing the clutch or shift motor you need to learn to match the transmission system (gears, motor position, etc.).

[36] Speed Limit > Lifting of maximum speed limits for police and official vehicles and imported vehicles

(❗Note:Special features not available on all vehicles,please contact with us via ebay message to check compatiability.)

Supports 15+ Languages

Supporting English, Spanish, Finnish, French, Italian,Japanese, Korean, Polish, Portuguese,Arabic, German, Russian, Chinese, Vietnamese.

(Please provide us the S/N via ebay message to change the language)

PaymentDelivery detailsTerms of salesAbout usContact us

Payment

We accept Credit cards、Debit card、Apple Pay、Google Pay、PayPal ect. payment.

Please pay for your item within 3 days of the auction end time.

Note: We are not responsible for buyers’ local taxes. Import duties, taxes and charges which are not included in the item price or shipping cost are the buyers’ responsbility.

Please include your special requests in eBay note if there is any.

Delivery details

Order will be shipped within 1-3 business days after payment confirmed.

Usually, shipping takes around 5-7 business days. We’ll try our best to provide you the most reliable and affordable way of shipping service.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Please make sure it is correct and include phone number for delivery.

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty.

All items are guaranteed to be carefully checked before shipping out.

If the item you received is defective, please contact us firstly, offer us figures/video for proof, we’ll help you to deal with the situation and take the duty.

Please feel free to contact with us via ebay message if you have any questions while using the item.

Return Policy: Please return the item within 30 days after receiving if you are not happy with your purchasing. All returns are expected to be in original conditions, please email us first for return address and instructions.

About us

Dear buyers, we will appreciate a positive feedback with all 5 star rating when you are satisfied

Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.

We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to respond.

Brand	XTOOL
Supported System	ABS, EPB, SAS, SRS, TPMS
OBD Interface	CAN, EOBD, OBD, OBDII
CountryRegion of Manufacture	China
Type	Car Diagnostic Scanner Tool
Manufacturer Part Number	D7,D7S,D8,D8BT,D9,D9SPRO
Vehicle Type	Passenger Vehicle
Screen Size	7.0-inch LED,1024*600
Battery	4000mAh,3.7V
Memory	2GB RAM,32GB Flash
Processor	4 Core,1.6GHz
Hardware + Software Version	Android 10.0,2024 Newest Version
Connectivity	Wired Connection
Update	3 Years Free Update Online
Features 1	36+ Hot Reset Services
Features 2	Full OBD2 Functions
Features 3	All System Diagnostics
Features 4	Bi-Direction Control/Actuation Test/Active Test
New added functions	EC~U Coding
36+ Reset Functions1	Oil Light Reset,EPB Reset,SAS,DPF Regeneration,Headlight
36+ Reset Functions2	Throttle Relearn,ABS Bleeding,Injector Coding,Seat Calibration
36+ Reset Functions3	EGR Relearn,TPMS Reset,Gearbox Matching,Suspension
36+ Reset Functions4	Window Initialization,A/F settings,Start/Stop Reset
36+ Reset Functions5	Transporte Mode,Tire Upgrade,Gear Learning
36+ Reset Functions6	Electronic Pump Activation,Speed Limit,Clutch Adaption
36+ Reset Functions7	VGT Relearn, HV Battery, A/C Relearn,Rain/Light Sensor
36+ Reset Functions8	BMS Reset,Airbag Repair,Language Change
36+ Reset Functions9	Power Balance,EEPROM,SRS,FRM Reset,Reset control unit
Language-1	English, Spanish, Finnish, French, Italian
Language-2	Japanese, Korean, Polish, Portuguese
Language-3	Arabic, German, Russian, Chinese, Vietnamese
Features	Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Accessories	Adapter Cable, Carrying Case, USB Cable
UPC	Does not apply