2024 XTOOL X100PAD S Auto All System Diagnostics Scanner Car Coding Scan Tool

The XTOOL X100 PAD S diagnostic scanner is a powerful scanner to providing extra ordinary program functions for the engine system. It works on most OBD2/EOBD compliant vehicles, Support 10 modes of OBD2 test, Auto VIN scan for the vehicle system information, 32+ special Reset Services, data record and printing, ect.

The Top Reason for chose the X100 PAD S Scanner

The XTOOL X100 PAD S is a tablet scanner which is specially OE-Level intelligent full system disgnostic,is also support OBDII Diagnostic and 32+ special reset function.

Oil Reset/Engine oil light reset: Reset the Engine Oil Light System, which calculates the optimum oil life change interval based on the vehicle’s driving conditions and climate. The oil life reminder must be reset each time the oil is changed so that the system can calculate when the next oil change is required.
DPF Regenerate: DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
Tire Pressure Monitor System (TPMS)Reset: Allows you to quickly look up the tire sensor IDs from the vehicle ECU, as well as to perform TPMS replacement and reset procedures after tire sensors are replaced.
Timing belt light reset (Manual Operation)
EPB Electrical Parking Brake Adaptation: Electronic Parking Brake (EPB) System reset is a popular special function. You can use this function to reset the electronic parking brake system and brake pads, which also supports the brake pad replacement (retraction, release of the brake pump), G-sensor and body angle calibration.
TPS Throttle Body Adaptation: TPS Match, this function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state. It can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
Steering Angle Calibration: SAS reset supports recalibration of the steering angle sensor. After the calibration is successfully completed, the SAS fault memory will be automatically cleared.
Battery Reset: The Battery Management System (BMS) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
And many more functions such asInjector Coding, Air supension, Headlight Adjustment, Tire Upgrade and EEPROM Adapter…