Autel MaxiCOM MK906 Pro 2024 Version: Upgrade Version of Autel MS906 Pro & MK906BT !

Autel MaxiCOM MK906 Pro is the newly launched model aims at to replace its older model such as MaxiSys MS906BT & MaxiCOM MK906BT, offering customers a more efficient comprehensive automotive diagnostic solution. To achieve this goal, Autel MK906 Pro features more advanced hardware & software configurations.

Configuration Updates Based on MS906BT & MK906BT:

• 1. Operating system move on to Android 10.0 from Android 4.4.
• 2. Upgraded 8-core Qualcomm 660 Processor replacing old Exynos 5260 Processor.
• 3. Doubled RAM & ROM: 4GB/128GB ; Dual Frequency 2.4/5.0GHZ Wi-Fi.
• 4. Dual 16MP Front & Rear Cameras Replacing single 8MP Rear Camera.
• 5. Battery Capacity get increased up to 11600 mAh from 10000 mAh
• 6. Optimazed newest Software version. No need to upgrade to get new added functions such as battery testing and so on.

Conclusion: Thanks to these upgrade, Autel MK906 Pro fix running latency problem, low response, network unstable problem and other problems that frequently happened in the old MS906BT/MK906BT/MS906S. Autel MK906 Pro-TS not only offers more intuitive naviagtion interface, but aslo enhanced the running & response speed by 3 times.

New Added Features Based on Autel MS906BT & MK906BT:

• 1. Wider Vehicle Compatibility: Autel MS906 Pro can additionally support DoIP & CAN FD protocols without using exlusive adapters, featuring quicker & more accurate diagnosis on newer vehicles.
• 2. More User Friendly: Autel MS906 Pro adds another two quicker method for vehicle identification such as VIN Scan & License Scan; add Wi-Fi Print features to allow you share & print test report more conveniently; Support Autel Remote Expert to allow users to access sophisticated technicians for professional tech guidance.
• 3. Less Software Updation Fee: MS906BT requires 695 USD for 1 year subscription while MS906 Pro takes only 595, which is 100 bucks less.

Comparing MK906 Pro to MS906 Pro:

1. Cost the Same but with Better Hardwares; 2. Same Functionality but with multiple language options while MS906 Pro support only English.

Autel MK906 Pro 2024 Version: Advanced ECU Coding Scan Tool, Same Coding Function As MK908P II !

Autel MK906 Pro comes with high-end ECU coding functions, able to match & code newly replaced modules, modify preset module parameters, Activate functions that was hidden by the manufacturer, OE-setting Customization and so on. ECU Coding function allows you to recode adaptive data for certain components after making repairs or replacements to improve driving performance, and fuel efficiency and reduce power loss.

Here below are some frequenly used codings functions:

• 1.Auto Start/Stop disable or activation;
• 2. Beeping when unlocking and locking;
• 3. Locking the doors once a certain speed is reached(e.g. from 15 km/h);
• 4. Seatbelt warning sounds;
• 5. Mirrors automatically folding and unfolding;
• 6. Closing the windows after locking the car door with the key;
• 7. Lighting coding ;
• 8. Dashboard display coding;
• 9. Warning signals coding.

Online Coding: enable you to access the online data from the OEM server to do high-level repairs, such as online coding for BMW, for VW, for Porsche, for Nissan, for Nissan-GTR, for Infiniti, for Hyundai, etc

Offline Coding: read the code from the original module, and then write the code to the new module, such as adaptation for Ford, for Mazda, etc. Offline Coding for Jaguar, for Vauxhall, for Opel, etc.

Note: Available coding operations vary by the test vehicle, and only the available operations display in the menu. Please provide VIN for compatibility checking before purchasing.

Autel Scanner MaxiCOM MK906 Pro: 40+ Maintenance & Reset Services !

Autel Scanner MaxiSys MS906 Pro is able to offer over 40 services function includes commonly used reset & maintenance functions that a DIYer or auto technician would need for everyday car care. Here below is some of the most popular services:

• Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
• BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• IMMO / Key Programming: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key. (work only on Asian cars that feature low-grade IMMO systemI
• Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
• ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
• SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
• Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
• Headlight Matching: initialize the adaptive headlight system
• …

More Can be Done After Maintenance / Reset or Component Replacement: initial adaptation, Auto-learning, relearn, auto detection. For example: Crankshaft Sensor Learn and etc.

Note: The supported Services functions and special funtions vary by different vehicle brands, models and years. Please provide VIN of your vehicle for compatibility checking.

Autel MK906 Pro Bi-Directional Scanner: Diagnose Component Functioning Status In Seconds !

Autel MK906 Pro can output command signals to vehicle control unit to control actuator for test, so that it can test whether the actuator works normally, such as Fuel Pumps test, EGR test, etc, which saves you the time to dismantle in traditional operation or the cost spent on paying visits to mechanics. The test result will be displayed in graphics, charts or other format along with DTCs if there is any. Bi-Directional Control is also called Active Test.

With MK906 Pro,It’s easy to perform active test on various of modules & Actuators:

• A/C Configuration; Adaptive Headlamp Adjustment; Window Wipers Setting; Doors Turn on/off; Sunroof Switch on/off; Mirrors Folding/Unfolding; Active tests on Interior lights, inside mirrors, steering wheel heating, windows, horn, etc.

Note: The supported modules and actuators of this function are not the same on all vehilces. It varies by different vehicle brands, models and years.

Autel MaxiCOM MK906 Pro : More Potentials to Explore !

Digital Inspection: Work with MV108

The Digital Inspection application configures the MaxiSys Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way.

Battery Testing:Work with Autel BT506

Autel MaxiCOM MK808Z-TS can work with Autel BT506 battery tester to In Vehicle test and Out of Vehicle test function. In-vehicle Test is used for testing batteries that are installed in a vehicle, includes battery test, starter test, and generator test. These tests help determine the health status of the battery, the starter, and the generator, respectively. Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.

FCA Auto Auth:

Bypass SGW modules on 2018+ FCA vehicles to perform direct diagnostics including clear codes, Bi-Directional functions, actuations, relearns and so on. This requires 3 easy procedure: (1) Authorized OEM Access account registration; (2) Confirm compatible diagnostic platform; (The information of this Autel MaxiCOM MK906 Pro); (3) Immediate autorized security gateway access by adding users.

Note: BT506 & MV108 are not included in the package and requires additional purchase.

Autel MaxiCOM MK906 Pro: OE-Level All System Diagnosis Same As Autel MK908P II !

Autel MK906 Pro features OE-level All system diagnosis capability on most 12V OBDII vehicles and is able to penetrate deep into all available systems and modules to retrieve ECU info, read & erase DTCs, get various live data in text & graphic form and perform active test on various parts. Here below are some functions you might be very interested:

• Live Data: Display live data of various modules in 4 selectable modes: Analog Gauge Mode; Text Mode; Waveform Graph Mode; Full Screen Display
• Pre & Post Scan: This features allows to you generate a comparison report before and after repairing, which can clearly show you clinets what specific problem you have fixed for them and charge them based on the things you have done.
• Scan VIN & Scan Lisence: These are two quick and convenient vehicle identification method using the camera of MS906 Pro. MK906 Pro can also support other methods: Auto VIN; Manual VIN Input; Manual Vehicle Selection; OBD Direct Entry
• Support DoIP/ CAN FD Protocols: The new equipped MaxiVCI V200 can additionally support DoIP/ CAN FD protocols on newer vehicle models without using extra adapters.
• Wi-Fi Printing: allow you generate reports of the current functioning page via Wi-Fi.

Note: There are a lot more useful functions await you to explore. To check compatibility, please provide VIN of your vehicle.