146 $

2023 Autel MaxiCheck Pro for ABS Brake Auto Bleeding OBD2 Scan Diagnostic Tool AUTEL STORY Autel is one of the major manufacturers and suppliers of professional diagnostic tools, equipment and accessories in the automotive aftermarket. Since our foundation, we have been committed to creating maximum long-term value to customers worldwide by providing quality-assured, easy-to-use, cost-effective…

Availability: In Stock

Category: OBD2 Diagnosegerät

2023 Autel MaxiCheck Pro for ABS Brake Auto Bleeding OBD2 Scan Diagnostic Tool

AUTEL STORY

Autel is one of the major manufacturers and suppliers of professional diagnostic tools, equipment and accessories in the automotive aftermarket. Since our foundation, we have been committed to creating maximum long-term value to customers worldwide by providing quality-assured, easy-to-use, cost-effective and innovative products.

Autel Direct is authorized distributor for Autel products.

How to Power Up the Scanner

Please be reminded that MaxiCheck Pro does not come with built-in battery and it relies on the vehicle battery to provide power. Please follow the steps below to troubleshoot “won’t power up” issue.

Step 1: Connect the scanner to the DLC port of the vehicle through OBD2 included.

Step 2: Turn ignition on.

Won’t Power Up Troubleshooting:

Step 1: Make sure your car has good battery level.

Step 2: Check if you turned igition on.

Step 2: Check whether PIN 4, PIN 5 and PIN 16 on the DLC port has voltage.

Step 3: Check whether the PINs on the OBD2 cable are damaged.

No communication Troubleshooting:

Step 1: Check compatibility with us or Autel engineers before purchase.

Step 2: Update the software to the latest.

Step 3: Select the correct track on the menu, eg. ABS/SrS– USA — GM– 2000- Passenger Car– Chassis — E(Fourth digit of your VIN) — Delco/Bosch ABS/TCS — Special Functions– Automated Bleed

Step 4: If it shows no communication through auto bleed, check whether it communicates with the car through OBDII.

Step 5: If no communication through OBDII, please check whether the DLC port and the PINs on the OBDII cable are damaged.

NOTE: If there are any ABS DTCs present, it will show communication fail too. Please clear the ABS codes or make proper repair/replacement first.

NOTE: For some of elder CHRYSLTER car makes, it may need CHRYSLER-16 CCD adapter(not included) to work with ABS autobleed tool to complete the brake bleeding function.

MAXICHECK PRO INTRODUCTION

Autel MaxiCheck Pro ABS Brake Bleeding Scan Tool can communicate with most post-1996 vehicles(Sedans, SUVs and Light Trucks) that are OBD2 compliant. It can perform all 10 modes of OBD2 tests but also service/special functions like Oil Reset, ABS, SrS, EPB, BMS, SAS and ABS Auto Bleed on certain vehicles.

To name just a few cases that ABS auto bleed can work:

1999 Chevrolet Suburban K1500 5.7l 4×4, 1999 Chevy Blazer, 2002 Chevy blazer 4 door 4wd, 2004 Silverado 1500hd, 2004 Hummer H2, 2005 Chevy Tahoe, 2006 GMC Sierra 1500 4×4, 2006 Chevy Silverado 1500 Crewcab, 2006 Chevy Express, 2007 Mercury Mariner Hybrid, 2010 mercury milan, 2011 GMC Sierra 2500 HD, 2012 Cadillac CTS-V.

1999 F-250 Superduty, 1999 Ford Expedition 5.4, 1999 F-150 4.6l xlt, 2000 f350 5.4 super duty 4×4, 2002 Ford Explorer Sport trac, 2004 Lincoln LS, 2004 F-150 4.2L heritage xl, 2006 Ford Explorer, 2010 Ford fusion, 2011 Ford Fusion non-hybrid, 2011 Ford Fusion, 2012 Ford F-250, 2012 Ford Fusion non hybrid, 2012 F-150 Lariat 4×4 with EcoBoost 3.5

2000 jeep wrangler, 2005 Dodge Ram srt10 quad cab, 2005 Dodge Ram 2500, 2012 Dodge Ram 1500 Hemi V8 Truck, 2015 Jeep JKUR manual transmission

2003 Toyota 4 Runner, 2008 RAV4, 2013 Toyota highlander

2005 Hyundai Tucson, 2007 Santa Fe(HCU Air Bleeding Mode)

Note: If your vehicle match above cases, it does NOT necessarily mean that MaxiCheck Pro will definitely perform ABS Auto Bleed on your vehicle. Please send VIN number to check compatibility before purchase.

NOTE: Japanese vehicles like Toyota, Honda may vary in auto bleed function even for the same make, model and year. Please check with a dealership whether your car comes with this function before purchase.

SERVICE FUNCTIONS(NOT UNIVERSALLY COMPATIBLE)

Oil Reset: Reset service mileage & service intervals after engine oil is changed.

SAS Calibration: Reset the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.

EPB Service: Resetting brakes after disc or pad replacement and etc.

ABS/SRS Services: Perform various active/functional tests to check ABS and SRS (Airbag) systems like ABS Brake Bleeding, Pump Motor Test and checking Module Information and etc.

BMS: Battery Registration.

NOTE: Please be reminded that service and special functions listed above are NOT universally compatible. Check compatibility with VIN number first before purchase.

NOTE: ABS, SRS diagnosis function is NOT universally compatible. Please check compatibility with VIN number before purchase.

NOTE: MaxiCheck Pro can NOT scan Engine and Transmission systems.

AUTOMATED BLEED/BI-DIRECTIONAL CONTROL

Autel MaxiCheck Pro Auto Bleed Scan Tool has the capability to perform bi-directional control functions and active tests. It can command vehicle’s ECU to perform ABS Auto Bleed as long as the vehicle’s ECU is programmed to perform this task.

How To Perform ABS Auto Bleed/Troubleshooting

1. Hook up MaxiCheck Pro to your vehicle and make sure the connection is solid.

2. Diagnose the vehicle and make sure no DTC is present.

3. Put in your VIN number or select from the menu ABS/SrS- ABS- Vehicle Selection- Special Function- ABS Auto Bleed, Automated Bleed or equivalent name.

4. If you can’t find your vehicle listed in the menu, please download the Maxi PC Suite from Autel website. Then update the software to the latest and retry later.

NOTE: Please update the software to the latest before use to find more vehicle coverage.

ALL 10 MODES OF OBD2 TESTS & MORE

Autel MaxiCheck Pro OBD2 Diagnostic Scan Tool can perform support all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN and perform all 10 modes of OBD2 tests, including: read/clear diagnostic trouble codes, view freeze frame, show live data stream of multiple sensors in graph or text, smog check, O2 Monitor Test, Component Test, On-Board Monitor Test, Module Present, View Vehicle Information and DTC Lookup to check the meanings of DTCs.

TURN OFF CHECK ENGINE LIGHT

Autel MaxiCheck Pro can access vehicle’s PCM and perform all 10 modes of OBD2 tests. It can read and clear codes and turn off check engine light.

NOTE: The OBD-II port is usually located under the dashboard, beneath the steering wheel. You shall find a 16 PIN port. Plug the OBDII cable into the port(only one direction) and select OBDII to scan the OBD system.

NOTE: To power up the scanner, you need to plug it into the OBD port and turn the ignition on.


Multilingual Menu The default language of Autel MaxiCheck pro is English. Please let us know the serial number and we could change the default languages to French, Spanish, German, Italian, Portuguese, Russian, Swedish, Dutch, Polish and Korean.	LIFETIME FREE SOFTWARE UPDATES Autel MaxiCheck Pro OBD2 scanner comes with LIFETIME FREE software updates. To download software updates, please visit Autel website and download the Update Client to your PC with the track: Support & Updates- Firmware & Download- Update Client- Maxi PC Suite NOTE: If your vehicle is not listed in the menu, please download the software updates for your vehicle and retry later.	UNMATCHED VEHICLE COVERAGE Autel MaxiCheck Pro OBDII scan tool supports all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN and can work on most OBD2 compliant vehicles post 1996 to perform all 10 modes of OBD2 tests. However, service functions like Oil Reset, ABS/SrS, EPB, SAS, BMS, DPF and special functions like ABS Auto Bleed is NOT universally compatible and please check compatibility with VIN number(s) first before purchase. Autel MaxiCheck Pro car diagnostic scanner can work on various vehicles like GM, Ford, Chrysler, Toyota, Honda, Kia, Hyundai, BMW, VW and etc from 1996-2015 to perform ABS

On Jan 5, 2023 at 23:45:48 PST, seller added the following information:

Brand	AUTEL
MPN	Does Not Apply
Type	Auto Diagnostic Tool Code Scanner
CountryRegion of Manufacture	China
Vehicle Type	Passenger Vehicle
OBD Interface	OBDII
Supported System	ABS
Accessories	Adapter Cable
Features	Check Engine Light Shut Off
Manufacturer Part Number	autel maxicheck pro
Connectivity	WiFi
UPC	Does not apply